Home Uses of the System The System Protecting more than Houses Pump Curve Machine Cost
Our System will prevent this!
Our Fire Suppressant System was Engineered to keep Your house or building from burning down when a Fire Storm approaches.
You will be able to evacuate with the confidence that when it’s safe for you to return,
your home and all your belongings will still be intact.
Our Fire Suppressant System is truly unique. It is so Revolutionary in the way it works, that it has a Patent Pending #12537411 and Patent Pending #12544990
Our System detects heat from a Wildfire and turns on automatically. It protects your entire home, not just what the Fireman's hose can reach.
When reading this page please keep in mind that the main goal for our company is to keep you property from burning down when overrun by a Wildfire. We will do All that we can to help you and your contractor install the system to work as efficiently as possible if you choose to install the system yourself. We will help all that we can with Our D.V.D., Picture Email and Toll Free number and for those that request one of our Authorize Representatives will come to your location. If your plan is to have us install the system we will require your approval before we do anything to your property. We will educate you in any and all possible ways to prevent fire damage. With every building that we install our system on we will hire a Fireman as a consultant to give fire prevention advice so that all possible contingencies are taken into consideration for your approval. Keep in mind there are no guaranties in life other than death and taxes, but we believe with the deepest convictions that if our system is install properly on your structure, it will not burn down when threatened by a Wildfire.
Our concept was to design a system that would create the Maximum amount of water flow under high pressure while using the least amount of electricity. The reason for this approach was so that our system could store the electricity needed and is a stand alone utility that is independent from everything else.
Our Engineers stayed true to our concept when designing our Fire Suppressant System. The systems power was designed so that if your home or building is currently vacant without the luxury of electricity, it will still function when needed. It has Photovoltaic Cells that keeps its Battery Reserve fully charged year round. It also has on board a Battery Charger so that you can test the Fire Suppressant System without any loss to the Battery Reserve amperage level. The Battery Reserve holds enough electrical current to not only allow the system to run its Duty Cycle, but it has enough in reserve to power for several hours on the Contumacious Run setting of the Duty Cycle.
Our Fire Suppressant System is also designed to be Smart when it comes to protecting your property. In the event that the system has been activated ,it will send a signal to the Security Monitoring Company. They will in return call you and tell you someone is trying to remove the Systems cover or that one of the Filament Line has been breached. It will do this so you can call your house, a neighbor or the local fire department to see if there is in fact a fire. It you find that the system was Accidental Activated you will be able to call your Fire Suppressant System and turn it off. It has this function to reserve batteries and water in the event of an accident. A Web Cam can also be used so you can see if someone is trying to break into the System if the Monitoring Company tells you the Systems cover is being tampered with. You can then call the Fire Department or the Police. Or you can then call the system back to activate the its Microcontroler so it is once again on guard protecting your home and possessions.
Our Fire Suppressant Systems Monitoring System is another unique feature that is also included (in our patent). You have a "Choice" of Three different types of wires as Filament Lines.
The first option is a Thin wire with a low melting point that allows a Low Voltage to pass thru it. This style of wire is for those that want the maximum sensitivity level to detect a fire.
The second will be a Thicker wire that allows a Frequency to pass thru it. This style of wire is for those that have children or pets. By using the thicker wire there will be less of a chance that the system will be accidentally activated.
The Third choice of wire filament will be a Fiber Optic line. The line will be extremely difficult to break. This type of line can be partially cut and still function. This line is recommended for those wishing to protect a small business, a church, a barn or if the property has heavy use.
There will be Six different zones for whichever type of filament you choose. You will be Responsible for running the filament lines around the property perimeter, around the structure as well as on the structure itself. We will Assist you in determining where the potential Hot Spots are located. We do this with Our D.V.D. On Our D.V.D. we will show you the best place to run your filament lines so they are in the path of the fire as it starts to spread. These lines are very thin and can be painted so that they are not seen.
On the Fire Suppressant System Machine there is a Control Panel. On which there is a LED Indicator Panel. If your Fire Suppressant System called you and you then turned it off because you determined it was activated accidentally. With the LED Indicator light Panel it will be easy for you to find the breach. Because you were Responsible for running the filament lines, or approved where they were run all you need to do is look at the color of the LED Indicator light Panel to see which one is Red. Then you will walk the line and look for the breach. The first and second types of filament wires will only require a pair of scissors and a pair of pliers to repair the line. The Fiber Optic is a little more difficult but can be spliced together in only a few minutes.
These filament lines that pass thru the LED Indicator light Panel on their way to the Micro Controller. The Micro Controller contains the Firmware that dictates the Duty Cycle. The Duty Cycle has 25 options of On / Off times of operation. We will help you to make the right choice for which is the right setting for your property.
A big factor in which setting you choose will be your location. Some areas are very hilly with lots of "Weeds" and bushes. Others are densely wooded. While some areas are surrounded by houses that are filled with petroleum by products that may burn for extended periods. Prevailing winds is another factor to consider. In any event Our D.V.D. is very thorough in helping you make the right decisions in Fire Suppression setting.
Along with the Filament Lines and Duty Cycle selection is Strategic Placement of your sprinkler lines and Sprinkler Heads that you will be Responsible for should you chose to install the system or have your contractor install it. If one of our Authorized Representatives installs the system you will be responsible for approving the all work that is being done to your building. Our Fire Suppressant System Engineers have also included in our Patent, our unique way that we achieve the high flow and pressure of water while consuming such little electricity. By having so much water flow and pressure gives you the ability to suppress and or prevent fires by using a multitude of Sprinkler Heads. Our Technical Support Staff will give you many options of Sprinkler Placement to chose from. All the Sprinklers are housed in Boxes with lids. All the Piping has Millwork to cover it. The goal is not to see the System, Supply Tank, Sprinklers or any of the Piping.
If your house is on the edge of a hill at the end of your street you can run your Filament Lines Five hundred to a Thousand feet or more down the slope of the hill. Once the Filament Line is breach by a fire you will have enough water flow and pressure to power several Water Cannons. This will Stop the fire from climbing that portion of the slope. There is also a good chance that you will also extinguish any and all hot ambers that can be blown on your home as well.
If your house and Fire Suppressant System is Not able to prevent fire from coming to your property due to the landscape, you Will still be able to protect your structure and belongings from the Hot Ambers. Our System will work with many Sprinkler Heads. Our 3hp System can work with up to 18 Sprinkler Heads protecting 3,500 sq. ft. structure. Our system will maintain 24 psi's with each sprinkler. Each sprinkler can easily spray water 25 feet to the left and right. Therefore, each sprinkler will easily cover 50 feet. Using 18 sprinklers will allow our system to cover 900 linear feet of surface area. Our 5hp System can work with up to 32 Sprinkler Heads protecting 6,000 sq. ft. structure. Our system will maintain 24 psi's with each sprinkler. Each sprinkler can easily spray water 25 feet to the left and right. Therefore, each sprinkler will easily cover 50 feet. Using 32 sprinklers will allow our system to cover 1600 linear feet of surface area. We are currently conducting Research and Development on our 7.5 and 10hp systems. If you have a big house on top of the hill don’t worry about the cost of buying 2 or more of our Fire Suppressant Systems. You will qualify for our Mail In Rebate of $3,000 per machine when you purchase Two or more Fire Suppressant Systems for that address.
Whether you use Water Cannons or Sprinkler Heads hot ambers can’t start a fire on a wet surface. Strategic Placement of Sprinkler Heads is very important. Our D.V.D. covers this in depth. There are many factors to consider that must be taken into consideration when starting Strategic Placement of Sprinkler Heads. We will help all that we can with Our D.V.D., Picture Email and Toll Free number if you chose to install the system yourself. For those that request one of our Authorize Representatives will come to your location to help you. Our goal is to help you create a Water Shield that covers your entire house!
We also have designed a system for those that live in Housing Tract were each of the houses are only a few feet apart. This system will also be Ideal for those who live in Mobile Home Parks. This is also perfect for protecting Marians. The machine itself is the same, however the Duty Cycle time duration is much different. The Supply Tank for this system is also much smaller and is filled by the local water utility. The size of its Supply Tank is Four feet tall by Three feet wide by Five feet long. We recommend that this system call your 911 when activated. The reason for the size of the Supply Tank, Duty Cycle duration and Fire Station call is so your house will not catch on fire when your neighbors house is on fire.
When choosing the Sprinkler Heads you will also have the option of using our Pop-Up Impact Sprinkler Heads. These are by far superior to any other sprinkler heads that can be purchased for this application. Our Pop-up Impact Sprinkler Heads are housed in their own little box that has an opening and closing lid. These boxes can be buried or attached to the house and painted . They are perfect for surrounding our house. Because they have couplers that allow the Sprinkler Head to point upwards from minus forty five to ninety degrees. This allows our Sprinkler Heads to put water where its needed when the Fire Storm starts showering your structure with Hot Ambers that are being blown by the wind. Our Sprinkler Heads Housing can also be attached to the building in places like under the soffit and eves so they can work with prevailing strong winds. They can also be installed on the roof without any visual impact.
Our Engineers were concerned with the time delay that is required to achieve a siphon by the impeller of the water pump. Although our Patented Fire Suppressant System uses Impellers that achieve a siphon in Half the time of ordinary water pumps, Any delay when suppressing a fire is too long. So our Engineers have included an External Tank on our Fire Suppressant System. The External Water Tank holds over Three hundred and Fifty gallons of water. By having the Output of the External Water Tank at the bottom of the tank which is level with the Intake on the Fire Suppressant Systems Intake to the Impellers. The design eliminates the need to siphon the water. Once the Motor starts spinning the impellers push water immediately. Although Two hundred gallons of water is only enough water for the Fire Suppressant System to spray water for a few minutes, this may be enough water to extinguish the flame that activated the Fire Suppressant System. It is also enough water to prevent other fires from starting.
Our patented way of moving water is the Best way to suppress a Fire Storm. The only draw back of our Fire Suppressant System is that it requires water. There is more that one way to supply water to the Fire Suppressant System External Tank, however we highly recommend that you use a Supply Tank. If you have a pool or well that you would like to use to supply the External tank this will work but requires Additional Hardware. We strongly discourage that you use this type of application as your supply source. If there are any troubles moving this water, your house could very well suffer severe damage.
If you choose to use your pool or well as the water supply we also make a water pump that can be attached to either of these. This Secondary Pump System setup designed to be powered by batteries which is independent from the local electricity utility. However, we still recommend that you use a Smaller Supply Tank so that the Fire Suppressant System does Not run out of water when your home requires being dosed with it. The size of the Smaller Supply Tank that we manufacture vary.. This tank comes with an Electric Fill Switch that will turn on the Secondary Pump so the Fire Suppressant System does not run out of water during the operation of the Duty Cycle. This tanks switch Must have an electric conduit line run to the Secondary Pump System. The Small Water Supply Tank is Not recommended for those who’s water supply is the local water utility.
The Supply Tank whether being large or small that are made by us comes ready to assemble. We feel that they are your best choice in more ways than one. Whichever one you choose will come in a box and is made of pre cut aluminum with all its holes pre drilled. It comes with a Fitted Water Tight Gasket. It all bolts together with easy to follow picture instructions. All parts to assemble it together are color coded for easy assembly, Our Supply Tanks come with wood tracking so siding can be installed on them. Once completed next to a Seventeen foot long or longer wall, it will look like part of the house that is there to protect.
We have Three different sized Water Supply Tanks. Each of these tanks has a Float Switch and are designed to be filled by the local water utility.
For more Information about Our system please call FSS Pumps LLC
Phone (626)-367-6480 (626)-806-3766
F.S.S. Pumps
Executive Office / 913 North Benson Ave. Suite G
Upland California Business License #25926 California L.L.C. 27-1297504 Dunn and Bradstreet #83-280-5068
